4/29/2023 0 Comments Rose online private server portsOnce the ports have been opened you will then be able to connect remotely using the new DDNS address, which is the name you created plus the DDNS server.You can get port forwarding assistance by going to, contacting the Router manufacturer’s tech support or you may call our technical support line at 1-866-446-595.TCP port 9010 needs to be opened as TCP /UDP You may have to change the web port to 8245 as it is often blocked by the provider. The ports to be opened are under the NETWORK tab of the DVR. Now you will have to open the ports on the router.(if it shows “FAILED” or no message at all, reboot the unit and try again.) ***Test the remote connection to see if the Auto Private IP function work*** Note: If you fail to connect then you must open the ports on the Router or Firewall. Once you get “SUCCESS” for the registration, click on SAVE.These options are only used when is selected) Create a DVR NAME (no caps, no spaces) then click START to register the name with our DDNS service (Do not enter a User and Password on this tab.is a third party service used only if you are unable to successfully register with DW. Select the DDNS server Note: and are hosted by Digital Watchdog.After the progress bar reaches 100 percent, go to the DDNS tab.Enable UPNP and AUTO Private IP, then SAVE AUTO Private IP will open the PORTS if the unit is connected to a basic router going to a basic modem.Change DNS SERVER 2 to: 168.126.63.2 You can find these DNS servers in the HELP MENU of the DVR.You can now change the IP to be outside the Router’s DHCP range If you wish to keep the same IP you will have to reserve the IP to the DVR’s MAC ADDRESS on the router. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |